0
0 "Cart" in English is "Cart" (It seems like you have entered the word "empty." Can you please provide more context or let me know how I can assist you further?)

How to install the Artiteq Click Rail Pro picture rail system?

Installing an Artiteq Click Rail Pro picture rail is simple and allows you to hang frames or other objects in a stylish and flexible way. Here is a detailed guide to install this system:


Materials Needed:

  • Click Rail Pro and its accessories (fixing clips, corner or straight connectors, end caps).
  • Screws and wall plugs suitable for your type of wall.
  • Drill, screwdriver, and optionally a hammer.
  • Bubble level or laser to ensure a straight installation.
  • Tape measure or ruler for measuring.
  • Optional: hacksaw to cut the rail to the correct length.

Installation Steps:

1. Prepare Tools and Wall

  • Clean the wall area where the rail will be installed.
  • Check that the wall is in good condition and free of cracks.

2. Mark the Installation Line

  • Decide at what height to install the picture rail (often near the ceiling for a discreet finish).
  • Use a bubble level to draw a straight line on the wall to guide the fixing of the clips.

3. Attach Wall Clips

  • Clip Spacing: Place a clip every 30 to 40 cm to ensure a secure hold. Add clips at each end and near the joints between rails.
  • Drill holes along the marked line, insert wall plugs if necessary, then screw the clips into the wall.

4. Install the Rail

  • Rail Connection: If using multiple rail sections, use the provided connectors to align them neatly.
  • Snap the rail onto the clips by pressing firmly. An audible "click" confirms the rail is securely attached.

5. Add End Caps

  • Place end caps at the ends of the rails for a clean and aesthetic finish.

6. Install Cables and Hooks

  • Insert suspension cables (perlon, steel, or rigid rod) into the rail.
  • Add hooks suitable for your frames or objects.
  • Adjust the height of the cables and hooks as needed.

Additional Tips:

  1. Weight Capacity: The Click Rail Pro supports up to 50 kg/m, ideal for heavy frames. Make sure to use suitable hooks and cables.
  2. Rail Cutting: If a rail is too long, cut it with a hacksaw and file the edges for a clean finish.
  3. Cleaning: Clean the rail after installation to remove any dust or marks.

By following these steps, you will have a securely installed picture rail, ready to showcase your frames or decorations with a professional and elegant look.

Share this content