0
0 "Cart" in English is "Cart" (empty)

How to install the R10 Newly picture rail?

Installing the R10 picture rail Newly follows a process similar to other picture rail systems, but with some specificities unique to this model. Here is a step-by-step guide to install the R10 Newly picture rail:


Materials needed:

  • R10 Newly picture rail
  • Newly fixing clips (provided with the rail)
  • Screws and wall plugs (suitable for your wall type)
  • Drill with suitable drill bit
  • Screwdriver
  • Spirit level
  • Pencil for marking
  • Hacksaw (if you need to cut the rail to a specific length)

Installation steps:

1. Plan the installation

  • Determine the location of the picture rail based on the artworks you want to hang.
  • Draw a straight line on the wall using a spirit level to ensure perfect alignment.

2. Prepare the fixing clips

  • Position the Newly fixing clips at regular intervals, usually every 30 to 40 cm.
  • Place a clip about 5-10 cm from each end of the rail.

3. Mark drilling points

  • Position the clips along the drawn line and mark the fixing hole locations with a pencil.

4. Drill and fix the clips

  • Drill holes at the marked locations.
    • Wall type: Use suitable wall plugs if the wall is plasterboard, concrete, or brick.
  • Fix the Newly clips to the wall with screws, ensuring they are well aligned.

5. Install the rail

  • Position the R10 Newly rail on the fixed clips on the wall.
  • Press firmly to snap it in place. You will hear a "click" indicating the rail is securely fixed.

6. Check and finalize the installation

  • Ensure the rail is securely fixed and does not move.
  • Insert the suspension wires and hooks to ensure the system works correctly.

Tips for successful installation:

  • Shortening the rail: If the rail is too long, neatly cut it to the desired length with a hacksaw, then file the edges to avoid sharp edges.
  • Wall corner: If installing the rail in a corner, use special connectors for a clean finish.
  • Adequate spacing: Leave space between the rail and ceiling for easier installation and use.

Once installed, the R10 Newly system offers an elegant and practical solution for hanging your artworks while ensuring a clean aesthetic.

Share this content