Adhesive mounts for dibond

Plexiglas or your mirrors without damaging the support? The adhesive attachment for Dibond is the preferred technical solution for artists, printers, and interior decorators.

This self-adhesive fixing system is directly applied to the back of your rigid panel. Once on the wall, the attachment becomes completely invisible, creating an elegant floating effect that enhances the artwork by slightly lifting it from the wall surface.

[H2] Why choose an adhesive fixing for your panels?

Using an adhesive hook offers many advantages compared to traditional systems (drilling, frames, clips):

• Tool-free installation: No need to drill the Dibond panel or mirror. The high-performance adhesive (often 3M or Xtramount type) ensures a strong chemical bond.

• Versatility of supports: These fixing plates are compatible with Dibond (Alu-Composite), Plexiglas (Acrylic), Forex (Expanded PVC), glass, and mirrors.

• Minimalist aesthetic: The attachment is hidden at the back. No nails or screws are visible on the front of the image.

• Safety and robustness: Made of galvanized steel, these attachments resist moisture and corrosion.

[H2] Which attachment to choose based on the weight of your artwork?

Your choice of adhesive fixing depends on the weight and dimensions of your panel. It is crucial to respect the maximum load capacity (MLC) to ensure the safety of the hanging.

• Attachment 45x45 mm: Ideal for small light formats (up to 1 kg).

• Attachment 70x70 mm: The standard for medium formats (up to 3-4 kg).

• Attachment 100x100 mm: For large Dibond panels or heavy mirrors (up to 6 kg, or 12 kg using two attachments).

• Complete kit: We often offer kits including the attachment, protective stops (pads) for the bottom of the artwork, and the wall hook.

[H2] Installation Guide: How to install a Dibond attachment?

To ensure maximum and lasting adhesion, follow these key steps:

1. Surface preparation: This is the most important step. The area on the back of the Dibond or mirror must be clean, dry, and free of grease. Use an alcohol degreaser or a provided 3M wipe.

2. Positioning: Mark the attachment's location (centered in the upper third of the panel).

3. Gluing: Remove the protective film from the adhesive and press the attachment firmly against the panel for 10 to 20 seconds. Remove air bubbles.

4. Drying time (Polymerization): Do not hang the artwork immediately! Let the adhesive rest 24 hours flat at room temperature for it to reach its maximum strength.

5. Hanging: Attach your hook to the wall and hang your artwork. Don't forget the spacer pads at the bottom of the artwork to ensure verticality and protect your wall.

[H3] Frequently Asked Questions (FAQ)

Can these attachments be used on wood or cardboard? No. The adhesive attachments are designed for smooth and non-porous surfaces like aluminum, glass, or acrylic.

Can an adhesive attachment be removed and reused? No, the adhesive is designed for permanent fixing. Once removed, it loses its properties and no longer guarantees the object's safety.

How many attachments for a large panoramic artwork? For wide or heavy formats, it is recommended to use two attachments spread along the width to balance the weight and stabilize the artwork.