Installing an Artiteq Click Rail Pro picture rail is simple and allows you to hang pictures or other objects in an aesthetic and flexible way. Here is a step-by-step guide to installing this system:

Materials needed:

• Click Rail Pro and its accessories (fixing clips, corner or straight connectors, finishing tips).
• Screws and dowels suitable for your wall type.
• Drill , screwdriver, and possibly a hammer.
• Spirit level or laser to ensure straight installation.
• Meter or ruler for measuring.
• Optional: hacksaw to cut the rail to the correct length.

Installation steps:

1. Prepare the tools and the wall

• Clean the area of the wall where the rail will be installed.
• Check that the wall is in good condition and does not have any cracks.

2. Draw the laying line

• Decide at what height to install the picture rail (often close to the ceiling for a discreet finish).
• Using a spirit level, draw a straight line on the wall to guide the attachment of the clips.

3. Fix the wall clips

• Clip spacing: Place a clip every 30-40cm to ensure a good hold. Add clips at each end and near the joints between rails.
• Drill the holes along the marked line, insert the anchors if necessary, then screw the clips to the wall.

4. Install the rail

• Connecting the Tracks: If you are using multiple sections of track, use the supplied connectors to align them neatly.
• Snap the rail onto the clips by pressing firmly. The audible "click" confirms that the rail is securely attached.

5. Add the finishing tips

• Place the end caps on the ends of the rails for a clean and aesthetic finish.

6. Install cables and hooks

• Insert the suspension cables (perlon, steel or rigid rod) into the rail.
• Add the hooks suitable for your frames or objects.
• Adjust the height of the cables and hooks as needed.

Additional tips:

1. Weight Capacity: The Click Rail Pro supports up to 50kg/m, ideal for heavy frames. Make sure to use the correct hooks and cables.
2. Cutting the Rail: If a rail is too long, cut it with a hacksaw and file the edges for a clean finish.
3. Cleaning: Clean the rail after installation to remove any dust or marks.

By following these steps, you will obtain a well-fixed picture rail, ready to accommodate your frames or decorations with a professional and elegant finish.