The Combi Pro Light picture rail by Artiteq is an innovative system that combines hanging and lighting for artworks. Here's how to install it:

Materials needed:

• Combi Pro Light picture rail

• Mounting clips

• Suitable screws and wall plugs

• Drill with appropriate drill bits

• Screwdriver

• Bubble level

• Tape measure

• Marking pencil

• Handsaw (if cutting is needed)

• Isolated conductor connector (sold separately)

Installation steps:

1. Preparation:

   • Choose the location for the rail, ideally near the ceiling.

   • Ensure the surface is clean and dry.

2. Marking mounting points:

   • Position the rail where desired and mark the locations for mounting clips approximately every 40 cm.

   • Use the bubble level to ensure straight alignment.

3. Mounting clips:

   • Drill holes at the marked locations, based on the wall type.

   • Insert wall plugs if needed.

   • Secure the clips by screwing the screws into the wall plugs or directly into the support.

4. Installing the rail:

   • Place the rail onto the mounting clips.

   • Press firmly to snap the rail into place.

5. Electrical connection:

   • Connect the rail to the electrical supply using the isolated conductor connector.

   • Ensure the installation complies with current electrical standards.

6. Installing light fixtures:

   • Attach the light fixtures at the desired location on the rail.

   • The fixtures can be repositioned as needed.

Additional tips:

• For a secure installation, use the mounting clips provided with the rail.

• If the wall is plasterboard, use appropriate wall plugs for a secure installation.

• The Combi Pro Light picture rail can be cut to the desired length using a handsaw.

• For added flexibility, the light fixtures can be moved along the rail according to your needs.

For visual assistance, watch the installation video