The Info Rail Magnetic by Artiteq is a variant of the classic Info Rail, with an integrated magnetic strip on top to hang objects with magnets in addition to documents inserted into the rail.

The installation process remains very similar to that of the standard Info Rail. Here is a step-by-step guide:

?️ Required Materials

• Info Rail Magnetic (1 m, 2 m, or 3 m)

• Mounting clips (usually included)

• Screws + wall anchors appropriate for your wall

• Drill + level + screwdriver

• Pencil for marking

? Installation Steps

1. Choose and Mark the Location

• Determine the desired height.

• Use a bubble level to draw a perfectly straight line.

2. Place the Mounting Clips

• Position a clip about every 40 cm.

• Mark the screw locations.

3. Drill and Anchor

• Drill the holes (use the appropriate drill bit for your wall: concrete, plaster, brick, etc.).

• Insert the anchors (except in wooden studs).

4. Attach the Mounting Clips

• Screw the clips to the wall. They should be securely fastened and level.

5. Clip the Rail

• Place the rail on the clips and push firmly until it clicks into place.

• Ensure the rail is securely snapped into place along its entire length.

6. Test the Hanging

• Slide some documents into the rail.

• Test the magnetic strip with magnets (small neodymium magnets recommended for strong hold).

? Useful Notes

• The rail can be cut to the desired length with a hacksaw.

• The rails are interlocking if you want a continuous line on a long wall.

• You can combine with custom magnets for aesthetics or communication (logos, icons, etc.).